Main Discussion Area > Bows

Skane Lillohus lockbow

<< < (3/3)

sleek:
Hey thats really something cool and unusual around here. How much set did it end up taking? What are the dimensions of the prod?

stuckinthemud:
It has a centre measure of about 27mm thick by 37mm wide at centre and 13mm x 28mm at the nocks.  Set is half an inch.  Length ntn is 89cm.  It draws to 14" which adds 25lb.  Draw weight rises very linearly at 12lb per inch

Pappy:
That's a cool project and looks like you done a fine job on it. :)
 Pappy

stuckinthemud:
Couldn't have done it without y'all casting an eye over the tillering this time last year

Navigation

[0] Message Index

[*] Previous page