My newest bow, deflex-reflex bamboo (moso) backed, maple and ipe core, horn belly. It has osage powerlam, maple handle, white horn nocks and leather handle. Draw weight 98 pounds at 28 inch draw. Unfortunately, it is a bit too heavy for me...
Length is 156 cm (61,4") n/n, width 36 mm (about 1 3/8") and thickness after the power lam 15 mm (about 5/8"). Power lam length is 500 mm (about 20"). Weight is 695 grams. It took only about 20 mm (about 3/4") set.
I made the belly lam from five piece: in the middle is ipe (about 20 cm (8")), then horn and at the nock some osage. Belly lam and core are tapered before glueing, belly 0,002 and core 0,004. The taper was almost perfect, because the bow didn't need tillering, just width tapering and few strokes with a scraper.
I have not yet got any speed readings but watching a test shooter shooting with this bow, it seems to be quite fast..
