Main Discussion Area > Bows

Bamboo-maple-horn, 98#@28"

<< < (7/7)

Badger:
   I don't know how you keep the handle from popping off at that heavy weight? Is it pinned?

Tuomo:
No, just glued with SmoothOn.

In fact, I don't know if it will stay or pop. I am not able (yet) to shoot this bow, so it is not really a problem yet.

Pat B:
Generally speaking, when a handle pops off of a self bow, at least, it's because there is movement(bending) in the handle and no amount of glue will prevent that. You might try wrapping it with sinew or another strong thread. I've been successful at doing that. On your next one try adding a power lam to prevent the handle area from bending.

Tuomo:
This bow has an osage power lam. I use a power lam in every laminated bow — it’s a nice detail and also helps prevent the handle from popping out. A thin and long strip between the belly and the handle piece is also a good option. Most problems occur when the handle piece is ipe or another very rigid material, because it doesn't bend with the bow.

JW_Halverson:
I think it is right and proper that the VERY FIRST new Bow of the Month Award goes to an absolutely exemplary showpiece of mastery of the art and craft.

No, this isn't my cup of tea, but in this case, I am no fool. I cannot help but admire the fine lines, the clean glue lines, the aesthetic and functional choice of materials blended together into something this side of perfection. I look back at the other comments, and I am pleased that most are from bowyers far better than I with knowledge and skills well beyond my abilities. They recognize the workmanship, too, they that are far less likely to be fooled by looks over execution.

Tuomo, you have earned some bragging rights with this bow. Congratulations.

Navigation

[0] Message Index

[*] Previous page