Black locusts bow

[Selfbowman]

I got this black locust stave from Jim Hammer. I felt that it was real dense so I did a couple of one inch cubes and weighed them then did a float test. Here are the results. They both weighed .54oz. Pics of float test.

[Pat B]

Barely buoyant.

[Selfbowman]

Pic of locust.

[Pappy]

Not trying to be a smart *** but is that good our bad ? 
 Pappy

[Selfbowman]

Pappy the black locust is as dense as Osage. In the bowyers bible Osage  specific gravity is .82 so if I’m right here 18% of the cube should be above the water line. On black locust the specific gravity is .69 So 31% of the cube should be above the water line. It seams that both wood types are very dense. This could be some very good black locust because of its density. I might be all off here not knowing what I’m talking about. So if I am please correct me. 🤠🤠

[Selfbowman]

Ok just thinking I decided to check the moisture in both woods. The Osage was6% and the locust was 10%. So the black locust moisture may be affecting the float test. Need a smart guy!

[bentstick54]

Arvin, you’re talking above my pay grade, but as always I’m following along and I’m sure like always will learn from your experience.

[Selfbowman]

Ok I made a white pine 1” cube it weighed.36 so lighter than the black locust. Specific gravity was .45 in the Bible. Here is the float test . Could not get it to float right but more above the water line. Not as dense .

[sleek]

Arvin, is that tap water or pure distilled water? That does make a difference in float height.

[sleek]

Ok I made a white pine 1” cube it weighed.36 so lighter than the black locust. Specific gravity was .45 in the Bible. Here is the float test . Could not get it to float right but more above the water line. Not as dense .

Assuming the dimensions are very close to 1 cubic inch, thays pinr block is .62 sg. Im starting to question the accuracy of that list in the TBB.

[Aksel]

You need to oven dry the samples for hours down to 0% water content if you want to get an accurate reading, that´s why Tim Baker mentioned a small sample  - like 1/2 inch in diameter dowel or with square sides. I think Tim mentioned 4 hours oven time for a small sample.