Main Discussion Area > Bows

What shall I do with this tiny yew stave?

(1/3) > >>

jameswoodmot:
So I’ve got this little cutie that was a side shoot on a large piece I took down. Not quite sure what to do with it.

It’s 56” long, the heart wood is 1 1/2” wide at the base and 1” wide at the top, that’s in the centre of the wood.

Questions are;

I think I should probably sinew it, am I making life hard for myself with such a narrow stave, should I find a bigger piece for my first sinew bow?
If I sinew,  I’ve seen modoc type bows with a bit of sapwood left at the widest points to make up the width, should I treat this piece of timber as a narrower version of the same thing?

Otherwise, what would you do with it? It’s such a clean piece of wood with tight rings but it’s just so dinky The only other option I thought of was just a small bith bow with relatively
square section and flipped tips. I’m not a huge fan of short draw bows so it would be good to get my 26” draw from it whay ever I do but not the end of the world if not.

I counted 27 rings in the heartwood for what it’s worth.

bjrogg:
You might want to wait for better advice about yew than I have. Never had a piece to work with.

I do have a bow from DVs that is almost an English war bow shape and profile, but shorter and around 45 lbs. it’s pretty narrow

I was impressed by how little wood it was and how light in the hand it was.

How’s the back? Is it all sapwood?

I seem to remember hearing it doesn’t take much heart wood

Hope you get something

Bjrogg

Del the cat:
Plenty of wood there for a nice primitive.  :)
You don't say how thick it is at the centre? May need to build it up at the grip.
Del

jameswoodmot:
Del It’s 1 1/4” wide heartwood in the centre and 3/4” thick and that’s including all the sap wood What do you think about the cross section, I’m having a hard time getting out of the “maximise width” mindset.

Bjrogg- yeah it’s clean sapwood all up the back. Sap wood is a bit thick.

Here’s a picture of the ends to give you an idea what I’ve got

superdav95:
I agree there’s a bow in there for sure.  Ring count isnt terrible.  I did one similar but it was 60”. It’s still one of my fastest bows.  I sinewed my and did a semi hollow limb design to somewhat match the heavy crown my stave had.  Worked out quite well and was about similar dimensions as yours here.  I’ll see if I can did up some pics and post here.  Couldn’t get the pics over but here is the link.  It shows two yew bows sinewed.  The one I’m referring to that’s similar to your stave is the one with sapwood retained smaller stave. Not the heartwood belly drop bow. 

http://www.primitivearcher.com/smf/index.php/topic,72630.msg1019583.html#msg1019583

Navigation

[0] Message Index

[#] Next page