Author Topic: First go with Black Locust - FINISHED with pics  (Read 402 times)

jameswoodmot and 2 Guests are viewing this topic.

Online jameswoodmot

  • Member
  • Posts: 94
Re: First go with Black Locust
« Reply #15 on: January 08, 2026, 05:53:47 pm »
Grip is on ready to dry.

Been shooting it a bit today. I’m pretty pleased. 171 with 8.5gpp which was a horrible experience on my fingers and 152 with 10.6gpp. I’ve got nothing on Selfbowman’s new bow but I’ve been wanting to make myself target bow for a while. I have confidence in this bow which is nice.

Here’s a video of it on the tiller, I’d really love to know if you think I could improve the bend. I tried to keep the bend more on the inner limb where it is wider and to not get a hinge inside the flips but I’m not sure if there is too much bend on the inners and maybe I should have been a bit braver in getting the outers to bend?

https://youtube.com/shorts/RNZXojXHQEQ?si=e04FYcLQwQqlTk4e

I would have liked a bit more draw weight from it but it was starting to show some set. Is 37lb from this much BL typical? It feels like a lot of bow for being relatively light in draw weight.


Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,994
  • if you have to ask you wouldn't understand ,Tenn.
Re: First go with Black Locust
« Reply #16 on: January 08, 2026, 07:23:00 pm »
Nice bow, the tiller looks pretty good to me, if anything look like a little flat spot a few inches out on the right limb not quite to mid limb.probably wouldn’t have mentioned it if you hadn’t ask. 😊Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Online jameswoodmot

  • Member
  • Posts: 94
Re: First go with Black Locust - FINISHED with pics
« Reply #17 on: Today at 12:30:36 pm »
Thanks Pappy!