Main Discussion Area > Bows

Short staves- draw length and draw weight trade off - Finished with pics

<< < (6/6)

jameswoodmot:
Here is the first bow that ended up as a laminate.

The photo outside is right after shooting and the one inside is 20 or so mins after. Flat through the middle.
You can see the odd side bend too, it’s got a bit of a twist when strung but you kinda have to look for it

jameswoodmot:
This is the only other photo I have of it, just after painting. Once it’s dry I’ll get proper photos and full draw pics

jameswoodmot:
I took almost no photos of making the second one but I took a few videos of pulling it in-hand along the way so I could keep an eye on the asymmetric tiller. This is the only full draw pic I can get.

The other photos I took in the woods after half hour of shooting with the guy I gave it to. It looks like it’s got string follow off to one side of the centre but it’s actually the knot that’s there making it look off, the string follow is dead centre.

jameswoodmot:
Pics

jameswoodmot:
Pics

Navigation

[0] Message Index

[*] Previous page