Main Discussion Area > Arrows
Show me your arrow tools!!!!
D. Tiller:
THANKS!
Pappy:
Here are some of mine, Finely got some pictures.Keep in mind you don't need all this stuff
I am just a tool and equipment nut.I like stuff. :)
Pappy
[attachment deleted by admin]
Pappy:
The first are arrow straighting tools,Grain scale,spine tester,cresting tool,Tapering jig,Cut off tool,another spin tester,feather splitter,Camp stove and I also have a wood chuck to taper nock and point ends if I don't do self nocks. :)
Pappy
[attachment deleted by admin]
DBernier:
Pappy, nice "stuff" The only thing I can add is on your arrow tapering tool is to drill a series of 1/4 inch dia. holes down between the angles to let a lot of the dust filter down out of the way. Helps in not clogging the sandpaper/files etc. Again, nice "stuff".
Dick
Phillip K:
Pretty Impressive implements, I just used these and some of that fat mixture before I Burnish the Arrow after Fletching.I used a bent Butter knife and heat it to shape the Fletches.PK Good Day
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version