Main Discussion Area > Arrows

Arrows from boards?

<< < (3/3)

Hillbilly:
Trey, I usually always take the nodes down even with the rest of the shaft with absolutely no problems. Just straighten them before you smooth the nodes down. Some people plug them, but you usually don't have to. I cut self-nocks behind a node. If the cane is thin-walled with a good sized hole, you may have to plug the forward end with a bamboo skewer or small dowel if you're tapering it for commercial field points or glue-on broadheads.

TreyNC:
Thanks for your help guys!!

Navigation

[0] Message Index

[*] Previous page