Main Discussion Area > Arrows

arrow box

<< < (2/2)

Arthur Herrmann:
In wood shop, I am makin a bow rack. I am in school, and only get 30 real working minutes a day. It holds two bows and a dozen arrows. It is going to been done in a couple months, so it'll be a while till I post it.

If you have takin woods, and are good, then improvise. Might make one at the end of the year, I will post it then.

bootboy:
sort of like an arrow rack, but they stand upright and its a complete cabinet looking thing.

Shooter_G22:
yea,   i know just on project at a time...

but i got improvised plan in my head....   it will consist of a crude frame of maybe 2x4's  left over at the job site and a half sheet of the of that masonight board that has the holes in it to hold up racks or pins that hold up hooks...  you know the kind that people put in there shop to hold up there tools...

 anyway since the holes are allready there and nice and neat in order i just figured on getting a wider drill bit and drill them out a little wider so that arrow's would fit through it and make it like a table top with wide arrow hole on the top suface and then another hole board at the bottom with origanal size hole in it so that the field tips insert snug up...and hold the arrow straight...  or maybe both top and bottom have hole for arrow shaft to fit through and just some ply wood on bottom of the bottom hole board about an inch or two apart so that i can load it with untipped arrow or just plan shafts ready to build up...  ;D

Navigation

[0] Message Index

[*] Previous page