Main Discussion Area > Shooting and Hunting

water/cape buffulo with stone points........ has it been done??

<< < (26/31) > >>

Justin Snyder:

--- Quote from: otis.drum on December 28, 2009, 01:27:10 am ---Keegan, was the howard hill a bamboo backed wood lam, or bamboo lam glass bow? he was a strong man hey  :)

Justin, are you talking about Jeff Challacombe from oz? as he has not taken one with an all wood, but has seen one hit with a 90# osage selfy that was a mis hit and was finished by rifle.

i don't doubt at all that it can be done, just not sure if it has. plenty have been taken with glass bows.




--- End quote ---
Same Jeff, I know better than to believe everything I read on the internet, but here is what he wrote.
"A couple of months ago I tested my 70# @ 26 1/2" draw longbow and 850 grain arrows (160 fps) on a freshly killed bull Buff. While I believe my set-up is sufficient for buff I wouldn't want any less performance from my bow and arrow combination.

I never got the opportunity for a shot at a bull buff but I shot a young one (360kgs) for meat for the property manager. They are a real challenge to hunt and I hope to go back next year (hopefully the wind won't be swirling all the time) and take a bull.

There has been quite a few Buff taken with laminated longbows in Oz over the years.

Jeff  "

Kegan:

--- Quote from: otis.drum on December 28, 2009, 01:27:10 am ---Keegan, was the howard hill a bamboo backed wood lam, or bamboo lam glass bow? he was a strong man hey  :)



--- End quote ---

Hill used a glass lam bow for his elephants, but I'm almost certain he used his normal solid bamboo bow for his buffulo. He used this same bow for his lion and you can see that it is indeed all boo in the photos, and does not have the same fiberglass you see today (the limbs are about 1" thick!). Hill was getting on in his 50's at that point, so I doubt he would have been using a bow that was 25# heavier on an animal much smaller than his elephants.

otis.drum:
keegan, interesting. i'd like to know for sure.

justin, it is amazing what you can find on the internet. very often the truth is not present though.

the longbows jeff is talking about are normal glass longbows, not all woods. jeff also made a glass bow for ashby to use for his buff/broadhead/arrow testing. jeff doesn't know of anyone taking either buff type with all woods, only the mis hit i spoke of yesterday (which he feels confident would have done the job had it been on the money), and all the ozzy buff have been taken with glass longbows and recurves as far as i am aware.

clinton miller who started this thread has taken two buff with his glass bow now.

Justin Snyder:
Interesting, Jeff had mentioned osage.  ;)

The other buff was a farm buff that got out on the highway. It was supposedly shot with a boo backed hickory, but Im not so convinced on that one either.

Regardless, I have made super heavy Ipe arrows with stone points that will penetrate almost anything. I would shoot them at a buff. I would be happy to make you some wood shafts that weigh over 65 grams.

otis.drum:
well i'd say (at least for water buff) that it may not have been done, and could be a first for someone that's still up for grabs.

i don't doubt it can be done with wood bows and arrows. i'm not convinced either way on stone points yet. would sure love to see someone do it  :)...after someone test proves them first  ;)

we don't get buff in cape york (except the odd couple in the bottom west corner) so i wont be hunting them for a while, but it certainly is a goal of mine. i will probably use one of my glass R/D bows unless i make a recurve before then. i do have a bamboo backed i made @ 62#, but i don't feel it's enough. i'll have to make a much heavier one to feel confident it will penetrate... and i'll be using metal heads for a start  :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version