Primitive Archer
Main Discussion Area => At the Forge => Topic started by: Handforged on March 24, 2020, 06:06:54 pm
-
This is something fun I finished up today. Thought you guys might enjoy pics! This is a 52100 "short" nessmuk style I call a Montana Nessmuk. I came up with this design after making skinning and caping knives for the local guides. We kept tweaking and messing with it and finally came up with something that seems to fill a LOT of the check off boxes for guys who use these in the woods every day. Including me, this is the knife I carry every day. This one has a noticeable hamon in dark etched steel, elk antler scales and brass pins. I really enjoy making this knife and folks seem to love them.
-
Sweet knife, it would make a great skinning tool. What is the blade length and thickness?
Mark
-
Sweet knife, it would make a great skinning tool. What is the blade length and thickness?
Mark
These are 3/16 at the spine with a flat grind to a secondary bevel just at the cutting edge. Blade length is 4.5" so it can be belt carried in any state (some states have a law preventing the carry of a belt knife larger than 5") Mine will take an elk apart like it's going out of style.
-
i am so confused and intrigued. it looks like a flat knife at the tip but it also looks like a big triangle of metal at the base.
-
i am so confused and intrigued. it looks like a flat knife at the tip but it also looks like a big triangle of metal at the base.
It's a traditional flat grind that carries through to sharp. It has a distal taper from the ricasso to the tip. All to decrease resistance in cutting and retain a thick spine with a fine cutting edge.