Primitive Archer
Main Discussion Area => Arrows => Topic started by: Danzn Bar on June 04, 2016, 07:47:23 am
-
I had a few people at Marshall ask me for pictures of the jig I use................
DBar
-
And a few more
-
Thanks for posting this Bill. I've been wanting to make one of these since I saw you use it the first time.
-
That's pretty cool, Bill. Here is what I use on difficult arrows. It
s an old electric wire insulator. Art Butner showed me this years ago...
(http://i5.photobucket.com/albums/y199/PatBNC/primitive%20archer/arrowwrenches008.jpg) (http://s5.photobucket.com/user/PatBNC/media/primitive%20archer/arrowwrenches008.jpg.html)
(http://i5.photobucket.com/albums/y199/PatBNC/primitive%20archer/arrowwrenches010.jpg) (http://s5.photobucket.com/user/PatBNC/media/primitive%20archer/arrowwrenches010.jpg.html)
-
Thanks, Bill. Gonna revamp mine.
-
Boy Pat , I can see that working just fine......
DBar
-
Cool Bill, thanks for sharing
-
Thanks for sharing it
The finest straightening jig I have seen
The ability to look down the shafts as you go sets it apart from the others I have used
-
Really like both of those ideas. Mine works but puts marks in shafts from square edge. Was wanting to make something different
-
Here's some details re Bill's shaft straightening jig.
http://www.primitivearcher.com/smf/index.php/topic,46593.msg635382.html#msg635382
-
thanx Bill.
-
Thanks for posting these, I've got the material now I just need to find the time.
-
Here's some details re Bill's shaft straightening jig.
http://www.primitivearcher.com/smf/index.php/topic,46593.msg635382.html#msg635382
Nice. Thank you. Is all the seemingly unnecessary metal (the curved base) supposed to be hot to help straighten?
-
I just use the edge of a table....gut
-
All the metal keeps the wood from catching fire.
-
That's right Don.......I posted this on another thread , but it applies he too
With this jig you can site down and rotate the shaft to see where the corrections need to be at the same time your adding heat with a heat gun. The metal angle is to keep the wood from burning and losing shape. I start out with about 9 shafts... start with the end away from you and work straightening towards you. don't go back because you will lose areas that you have straighten because of the hot shaft. Once you have gotten to the end closest to you, lay it down to cool and start another repeating the same process. once through all 9 shafts or the shafts are cool flip the shafts and start over straightening from the other end. I usually can get a shaft straight using this jig in two sessions plus one final tweaking. Took me a while to the hang of it, but I've made hundreds of cane and boo arrows and it seams to be the easiest and quickest way for me....
DBar
-
Nice, thanks
-
Both good ideas will have to get one or both. Kenneth