Primitive Archer
Main Discussion Area => Horn Bows => Topic started by: maitus on March 03, 2020, 07:35:26 pm
-
How to cut the teeth to convex scrapers so that the teeth will match?
-
make one side first transfer the spacing over to the second one ???
-
Logical.... thank You :D
-
Or just use a toothed plane blade and grind to shape. Super quick to sharpen. And actually stays sharp too. I use kunz no.112
-
I'v never seen toothed plane blade.... especially convex blade :)...Any picture?
-
Like this. Just a toothed plane blade that i ground to shape.