Primitive Archer
Main Discussion Area => Arrows => Topic started by: scota on September 01, 2008, 11:28:41 pm
-
Since I have never been I was just wondering at the acceptance of shooting primitive arrows at the larger 3D shoot courses ,,,,like at ETAR? Is it allowed and accepted, any rules or etiquette to followed for types of arrows/arrow heads??
Thanks !
-
I generally use a standard field point on my primitive arrows for target practice and 3-D shoots. There are other methods and as long as they don't do any more damage to a target that a field point they should be OK. One friend tapers the point end of his cane arrows about 2" to 3" beyond a node, fills the void with fine sand and seals it with pine pitch. Barry shot a 20 target 3D course with this arrow bouncing it off of rocks and sticking it in trees....as well as the targets! ;D Pat
-
The nail and brazing rod points work very well with the cane shafts. Putting the piece of metal in the shoot shafts work too. Thanks for showing those to me Pat.
TJ
-
TJ, Those were Kenneth's idea. I was fortunate enough to be the first recipient. They do work quite well for target arrow points. ;) Pat
-
Hardwood points work well. Just put on a footing in whatever way you want and use a pencil sharpener! I have found Bulletwood very durable and I am sure that Ipe or other harder tropical woods could work even better. The South American native use black palm split along the grain for long foreshaft/points and from using these ntive arrows I know they work very well and are amazingly durable. If the foreshaft and point is no larger than a field point and is basically a bullet shape and sharp rather than a flat ended blunt they will do no more damage to a target or 3D than a field point.
A friend of mine makes taper fit Bulletwood points on hazel and dogwood shafts and these work very well.
Mark in England