Primitive Archer

Main Discussion Area => English Warbow => Topic started by: stuckinthemud on October 08, 2016, 01:14:37 pm

Title: what would you do?
Post by: stuckinthemud on October 08, 2016, 01:14:37 pm

Hi Guys,

here is my heavy longbow project: holly, 67" ntn, horn nocks  (haven't cut string grooves yet), 2" natural deflex and a left/right curve in one limb.  If I lean really hard on the straight limb it deflects about 1/4", the other limb barely moves at all.  String all lines up, so would you straighten it some more or leave it?

(https://stuckinthemudsite.files.wordpress.com/2016/10/dscf3754-e1475943025533.jpg)

Title: Re: what would you do?
Post by: FilipT on October 08, 2016, 04:19:53 pm

What draw weight do you want at what draw length? Why did you make it "short" if you want warbow? What is the cross section at the handle, looks fairly big for bow this size?

Title: Re: what would you do?
Post by: FilipT on October 08, 2016, 06:54:23 pm

I am interested how this will turn out, I also want to make this shorter kind of warbow. That is why I asked you those questions.

Title: Re: what would you do?
Post by: mikekeswick on October 09, 2016, 04:11:05 am

Leave it until you brace it, only then will you get a true indication where the string will lie. I'd go with a flattish belly with holly too.

Title: Re: what would you do?
Post by: stuckinthemud on October 09, 2016, 05:57:39 am

Hi Stalker, its this length because I had to pike 6" off the one end as it had a complex of 3 knots and a bad twist.  Draw weight will be what the stave gives me but I would like more than 70#. 

Thanks Mike, I'll take it to brace and see what happens

Title: Re: what would you do?
Post by: FilipT on October 09, 2016, 07:01:35 am

I thought that something was "wrong" as usually people don't build "short" warbows. Although shortest MR warbow was 74" (not sure if ntn or ttt).

I think I will build 70" ntn warbow from hawthorn I said earlier I cut.

Did you want 28" draw length?

Title: Re: what would you do?
Post by: stuckinthemud on October 09, 2016, 08:46:10 am

Yes, certainly want 28", my normal draw is 24, but 30" is my target draw length