Primitive Archer
Main Discussion Area => Arrows => Topic started by: Pat B on May 28, 2023, 02:41:27 pm
-
I was out shooting today and this happened...
(https://i.imgur.com/OmQnjO0.jpg?1)
It is pretty painful when it is a self nock but I was impressed with the sinew wrap at the nock. I was shooting a bow I got from James Parker at the Classic this year, 50#@26", boo back and belly High Country. The shot was from 15 yards.
(https://i.imgur.com/BI0xzfV.jpg)
(https://i.imgur.com/LkvxbmK.jpg)
(https://i.imgur.com/ZfhyDVT.jpg)
-
That's a shame, those are some nice arrows. At the same time, it's pretty cool to see!
Any chance you could repair it? Maybe splice in a new section for the nock? I'm always trying to save the ones I mess up :)
-
Ouch, bummer. I always think it's funny how non-archers think robin-hooding an arrow is the coolest thing, but it something most of us live in fear of...
That is pretty great how the wrap held up, though. Sinew is tough stuff. I'm going back to silk thread on most of my arrows. It isn't as tough, but it doesn't unravel when it gets wet!
-
Aaron, I plan on trying to repair this arrow as you suggested.
WB, after the sinew wrap dries I put a thin coat of TBIII on the sinew wrap then seal with pitch varnish so the wraps don't unravel, wet or dry. Silk works well also but I don't think you can beat the strength of a sinew wrap.
-
I know this is not your style, Pat. I have had that happen and I just tapered the bit left over and glued on a plastic nock so the arrow could live on.
-
Too late, Pearlie. I already spliced a piece on the nock end. I'll post pics of the process after I'm done.
-
Well, the theory for the repair worked. I use a long bevel on each piece and used TBIII with rubber bands to hold it together over night and got good adhesion but my application was less than good. The alignment was off and I see no correction method worthwhile. One of those reparro arrow repair thingies would have worked fine.
-
Well at least you have consistent shot placement :) It does hurt when they are self nocks tho. Hope you can get it shooting again. I did see a real fancy set one time that had a small footing of ebony on the nock end.
Mike
-
Thats a bummer Pat, and I agree with Whistling Badger, I fear being that consistent and accurate lol (lol).
I had that happen once a few years ago when I was shooting 50-100 shots a day. It was cool, but also a bummer when I just spent the last week building a nice matching set of arrows. Mine split though, it was made of duglas fir. I started shooting different spots on the target for each arrow. I cant believe yours caught the arrow, I mean it stuck into the other arrow, CRAZY! (A)
-
It was the sinew wrap that caught the offending arrow.
I usually try not to shoot at the same spot but I was shooting a new bow and just trying to get used to it. Oh well, stuff happens. (SH)