Primitive Archer
Main Discussion Area => Bows => Topic started by: larze_fat on October 07, 2009, 04:36:46 pm
-
How do you guys figure out where to put your nocks?
-
I go a half an inch down from the tip then file it down from there at a forty five degree angle.
-
I usually do the same, half-inch on the back and 3/4" on the belly side. You can put them an inch from the tip, too if you want more room for using a stringer or something, but much more than an inch is just dead weight on the end of the limbs.
-
Here is how I cut my nocks. Jawge
http://georgeandjoni.home.comcast.net/~georgeandjoni/boardbowbuildalong.html