Primitive Archer
Main Discussion Area => Bows => Topic started by: wakosama on December 23, 2008, 01:27:48 pm
-
Thanks...
Happy Holidays
-
get in phone book under woodworking see if they have a wood craft store if ya can find that they might have it or urac 185 or system 3 which are all good but i never tryed the ststem 3 but hear it s good also might see if there s a rocklers wood working store there good luck brock
-
OK, So...
Rocklers, 25mi. south carries West System, System 3, and quick set, and several regular wood glues.
Hobby Lobby carries Smooth On, but only casting resin in stock.
Custom Hobby carries, quick set only in stock.
they all carry Tightbonds and Gorilla Glue, duco, etc.
But...
Woodcraft carries various System 3's and has T-88 in stock (two part slowset, thick... 8oz for $17.95)
and it's on the way home from work.
Oh, it's because I found some wood yesterday and long holiday week starts tomorrow.... I'll try to take pictures and post them tonight for advise.
Thanks...
LUK
-
You can't really go wrong with the Tight Bond.
-
i agree with justin tight bound 3 will work on anything epoxey will darn near if ur just glueing up wood to wood ur fine if ur usin glass well thats a diffrent story brock
-
Yep,tite bond 3 is good and cheap,but stay away from the gorilla glue,doesnt work well for bows,its brittle when dry,didnt seem to work too good on my furniture repair either.
-
What few glue ups I have done was with TB3 without any problems.I use that stuff on everything. :)
Pappy