Primitive Archer
Main Discussion Area => Bows => Topic started by: jturner on February 22, 2010, 01:53:12 am
-
sorry if the pics suck they are from my phone. Im tryin to figure out the best way to post pics so here it is(if this works), 62 inches nock to nock, 54 1/2 lbs@ 28 white ash 45ed over the osage deer antler over that. deer antler rest, hole in the top limb, I will get some better pics up later if these dont work
[attachment deleted by admin]
-
They are pretty small pics but they are posted!! ;D I like your arrow rest. what type of glue did you use on it? Ty
-
I inlet it into the wood a little and glued it with titebond 3 I was nervous about it but its holding, about 2000 shots so far, I also used titebond on one tip and super glue on the other so if one failed I would know which was better, but i dont remember which was which they are both holding so i guess it dont matter. The rest and tips were an exprement on this one. I hear alot of guys using titebond and other glues but this is the first time ive used anything but smooth-on for anything heavier than a kids bow. Im still tryin to figure out how to resize pics im gonna get some with the camera tomarrow and get them up.
-
Hey if ur using ur cell phone or a digital camera u can set ur image size up a bit it should be in the settings and is genarally self explained if u get them from 15-70kb usually a decent amount of resolution.
Cheers,
Russ
-
Nice job,what I can see of it, :) love the tips. :)
Pappy
-
Very nice work. Jawge
-
Cool - like the tips and rest, good job around that knothole!
-
Goodness knows I like creative and unusual nocks and other characteristics ::) Cool bow, nice job.
-
Looks like a seriously fine bow. You will need to post larger pics 640x480 for BOM consideration.