Primitive Archer

Main Discussion Area => Arrows => Topic started by: bowkee on June 29, 2010, 03:19:50 pm

Title: The flinstonish Arrows and Quiver
Post by: bowkee on June 29, 2010, 03:19:50 pm

This is the Arrow set for the Fred Flinstonish Sinew back I made.
The Arrows are 23" A BIT SHORT but  I added more weight to the tips with the sinew and fibers, kinda works like  a flu flu and helps the arrows paradox. Gonna make longer Arrows for that Bow Later.
I used goose feathers for the Fetches and the Noks are cut, steamed and wedged the Seperate the Nok, a lot more work than just cutting and shaping the Nok.
The quiver is another weaver type,for the bottom I just used thick leather with holes for the spines the fit in and wrapped cordage around to secure it so the bottom would not drop off.
Just for target fun. :)Phillip

[attachment deleted by admin]

Title: Re: The flinstonish Arrows and Quiver
Post by: PeteC on June 29, 2010, 11:28:09 pm

Nice lookin' set,but I don't see how you fellas shoot those short arrows. ;D God Bless

Title: Re: The flinstonish Arrows and Quiver
Post by: Pappy on June 30, 2010, 08:03:22 am

Very nice work. Good looking arrows and quiver. :)   
   Pappy

Title: Re: The flinstonish Arrows and Quiver
Post by: bowkee on June 30, 2010, 12:16:41 pm

Thank you much, The thing to shootin them shorties is kinda lean forward and and release,like this ::)

[attachment deleted by admin]

Title: Re: The flinstonish Arrows and Quiver
Post by: bowkee on June 30, 2010, 11:10:40 pm

one more, Here are the other arrows I just made for that Bow

[attachment deleted by admin]

Title: Re: The flinstonish Arrows and Quiver
Post by: Scowler on July 02, 2010, 12:48:42 pm

Cool looking gear.