Primitive Archer
Main Discussion Area => Bows => Topic started by: dstbstr on July 23, 2010, 06:42:34 pm
-
Hey, it's my first post. I've been reading lots of fascinating articles on the forum, and thought I'd ask for some advise. I've got about 6 bows behind me, though only 2 of them shoot, and they're both red oak. :) I'm currently working on a hickory back purple heart bow, and would like recommendations, as the last bow I made is now a 'trophy bow' and the one before that experienced 'explosive decompression.'
The two woods are glued together with TB3, approximately 72" long. The hickory is somewhere between 1/4" and 1/8" (yay for a rasp, hand planer, and a cabinet scraper). The PH is a remnant from a prior bow, so the center is the thinest part at about 3/4". I could cut a riser out of one of the ends to stiffen it up. I'm hoping to get about a 40# bow out of this one. I'm thinking of trying to do a stiff handle with a shelf, so that I can use it for target archery.
I'll be out over the weekend, but hope to hear recommendations for dimensions. Thanks, and keep up the archery. :)
-
I am currently working on an ash backed purpleheart bow and I have heard that it likes to fret easily.. That being said I would make it as wide/long as possible and get every portion of the working limb bending evenly. Also the hickory might overpower the PH so 1/8 to 3/16ths backing might be your best bet. And I would trap the back too. Good luck on yours. :)
-
Thanks, I'm hoping to get more done on it soon. I had a first attempt at a hickory backed PH, but the PH cracked on the top limb about 4 inches below the nock. I may turn it into a kid's bow by taking off about 4 inches from either side and scraping down the back to around 1/8" and scraping down the belly to a kids weight bow. As for this one, I'll try something in between an ELB and a pyramid bow I guess
-
I made a successful PH bow with a maple backing, but even that one had a tiny fret that I patched with rawhide/wrapping. Once I've seen one with a bamboo backing; if...IF...you find a board with no curles it'll be no problem.
[attachment deleted by admin]
-
That is a gorgeous bow. It looks like you cut through the backing on the tips, I thought that was kind of a 'no-no' but if it shoots, I won't argue. :) What woods did you use on the handle? Well, back to work on mine, I'll post some pictures if it starts coming out nicely
-
The rider is Osage and Wenge.
Here is what the tips look like. Yes, I cut through the backing, almost always do that, never had a problem. How could you tell from the pic??
[attachment deleted by admin]
-
Ooh, sexy bow! Does she shoot as hot as she looks, Medicinewheel?
-
Love that purple heart. Nice job , That osage makes a nice contrast hey ! Denny
-
PH sure makes for a nice bow if it doesn't fret!
This is a light weight being shot with a FF string, and she really rocks!
PS: Sorry I don't want to hijack this thread, here is more info on this bow:
http://www.primitivearcher.com/smf/index.php/topic,5171.msg71417.html#msg71417
-
I've got the bow roughed out, and I've started to floor tiller. I need to build myself a good tillering wall before I go too far. My handle looks horrible, but live and learn. It still feels like it's about a 200 pound bow, and that's starting at 3/4" on the arms and tapering to 1/2." The sides taper from 2" down to 1/2". Once I can get the bow strung I'll try to get a pic
-
Pics before stringing are fine too, especially if you have any concerns. ;)
Frode
-
Although it took 4 attempts, I managed to make a self bow from a purpleheart board. I was initially going by the TBB 1 which stated that a purpleheart flatbow at 65" for around 50# would need to be 1 5/8 inches wide. After 3 attempts I decided to make the limbs 2" wide, with pyramid style fades near the handle/riser and a flatbow taper at 14" from tip. The end result was a kind of pyramid/modoc + AFB hybrid that stayed together with no back lifting or belly chrys, 53#@28".
Honesty can't say if it stayed together due to design, superior piece of wood or pure blind luck...but this was my experience in any case.
[attachment deleted by admin]
-
What was the size of the belly from the fades to the tips on the 53#@28"? Mine starts at 3/4" and tapers from about 8 inches out of the handle to 1/2" at the nocks, but still feels like it's over 100# as I can't bend it much past a couple inches.
-
In this case I tapered the belly the same as a flatbow as opposed to a pyramid style bow. The board was originally 65" x 2" x 3/4" immediately began the belly reduction at the fades (3/4" to a final 3/8") but the 2" width was maintained from the fade until about the final 14" where I began to reduce the width of the limb until 3/8" at the tip.
I put a call in to my father (the bow went to him for father's day) to double check on the 14" as this is the only measurement I don't remember exactly.