Primitive Archer
Main Discussion Area => Bows => Topic started by: snedeker on April 16, 2007, 06:11:20 pm
-
I'm workind down my first ash stave, cut Nov. 2005, 1/4" thick rings. Seems incredibly hard in terms of rasping and scraping compared to what I expected, even though I have been working with hickory, bulletwood and osage most recently. Could some moisture retention make it seem harder to work? I don't have a meter. Planning on a 69" straight flatbow for a corn fed 6'5" Pennsylvannia german farm boy with a 31" draw.
Dave
-
I know wood seems alot harder than normal when it gets too dry (and therefore brittle). Don't know about retaining it though.
-
Dave, usually the wetter it is, the softer it is. Seasoned ash is pretty hard , tough wood, they make baseball bats out of it. I've made a few out of ash, and it works pretty easy with blade tools, but like you said, it's tough to rasp and scrape, especially wide limbs like you usually have on an ash bow.
-
Dave, tiller well. I find it weak in compression. I've made darn few white ash bows that didn't fret. Jawge
-
Had similar experiece as Jawge, have found some good white ash that was very hard and others that were very soft in compression. Steve
-
So far I've had good luck with ash, my camo bow has at least 1000 shots on
it no fretting yet. I find the wood pretty easy to work.
DanaM
-
this even hatcheted hard. I haven't worked with something with such thick riings -- there will only be two ring fadeouts per limb.
Dave
-
We put white ash flooring throughout our house because it is so hard...and beautiful. Pat