Primitive Archer
Main Discussion Area => Arrows => Topic started by: sadiejane on February 11, 2011, 04:26:03 pm
-
anyone ever used these?
your thoughts regarding them?
or have others suggestions for similar?
http://www.angelfire.com/blz/Ironwood/woodbows.html
thanks
-
I think 3Rivers has something like that in their latest catalog. Never tried it. I guess I am just a little leery of the short joint area for a 'footing'.
-
Cool idea. Looks good to me as long as you glue it up right. :)
-
i used some a few years ago on some cedar shafts and they worked pretty good.
-
Are they sponsers?
-
Hi, I've used them and liked them on PO shafts. Ron
-
well, i have a small pile of nice but useless broken wood arrows. reckon ya'll do too. and it seemed a way to put em back into service.
seems so simple and i keep thinking to myself-surely i can do that. but i dont have nor can think of anyone right of the top o my head, who has a lathe that would do that.
not sure how else it could be done. sounded sorta gimmicky but....if it works maybe worth the $?
thanks
-
I've used them an they work well for me. The product allows a wooden arrow to continue to function when the tip is broken off. Jawge
-
george-how long are they?
ever used em on the nock end?
have a few with broken nocks
-
4 or 5 in. I can measure one when I go downstairs. I've never used one on a nock but I've done similar type repairs on the nock end so they should work. Jawge
-
Like Jackcrafty said, the glue up would have to be nice and straight, but a jig similar to what people use for planing arrows should work just fine.
I had asked if he was interested in turning some from odd hardwoods and he was willing to crank 'em out if I sent him the blanks. I was thinking purpleheart or osage to produce nice weight forward arrows. Things got in the way and I didn't get them ordered and fell out of touch with the guy. He seems like a really nice sort of feller.
-
Hi All, To answer sadiejane's question, I would not want to use them on the nock end. The socket of the reparrow would be facing toward the target and there would be a chance of lifting a sliver. That's important when shooting off the hand.
The reparrows are very convenient, but don't do anything that can't be done with a more standard, spliced on footing. I believe George Tsoukalas recently had an article in PA demonstrating how to foot a wood shaft. Not an indictment of reparrows, as they truly are quicker than making your own footings. Ron
-
thanks for the info-didnt think about lifting a splinter if using em for nock end. but yr right-unless theres some sinew wrapping or glue or something???
so another ? regarding repairing broken nocks. have a set of woodies that were a gift. the nocks are glued on with something that wont release-tried heat, direct and steam and water....
was thinking about just taking the file to em and basically making self-nocks with the bit of plastic nock sleeve left on. just file right thru the whole mess...any thoughts? dont really wanna cut em off any shorter...theyre just on the edge of being long enuf as is. one resaon i was liking the idea of the reparrows.
thanks again you guys
really appreciate everyones help/ideas
-
I've used the Reparrows with success. They work great. Just be careful not to starve the glue joint when you attach them. I haven't had a problem with them being attached straight, as long as you're careful to cut your point taper straight. I've used them for nock ends, too.
(http://img.photobucket.com/albums/v103/scattershot/IMGP1999.jpg) These were done with a custom ordered nock taper, but it works with a point taper, too.
-
thanks!!
-
Ooooh, sexy nocks! I gotta rethink my next two dozen!
-
Well, I'm a little surprised and perplexed. ::) I make the Reparrow footings. I don't suggest anybody else do it, but I have used them for nocks and created entire arrows of Reparrows just to see what they would do. Never had one raise a splinter under any circumstance.
But what puzzles me is that on this site the main objection ought to be that they are not the LEAST BIT primitive! What are y'all thinkin of? (I have to say "y'all" now that I live in Kentucky)
(http://i33.photobucket.com/albums/d72/Reparrow/reparowcomposite.jpg)
This one is not actually a Reparrow because I made it with the standard nock taper instead of the point taper. If I could find a quick way to make the nocks, I'd use these all the time, because I do like the look.
(http://i33.photobucket.com/albums/d72/Reparrow/nockwalnut2.jpg)
Cheers,
Jim Davis
PS. Jawge was one of the first to try out Reparrows four or five years ago and he's had a few more to try since then.
-
Nice looking nock, Jim.
-
Jim, if it's handmade from wood, it's primitive enough for me! ;D
-
Primitive is not quite a religion on this site, although excommunication for use of f/g has been discussed on more than one occasion.
Jim, could you crank out a set of short "reparrows" specifically for making nocks? I dunno, call 'em Re-nock-o's? I think I'd like a set of arrows with walnut nocks!
-
JW,
It would be easy to make short Reparrows, but I think they would need to be long enough so that your nock would not cut into the taper. Wouldn't actually matter, but might look funny down in the bottom of the nock ....
I could make them with the nock taper, but it would be a completely separate setup from the one for point tapers. I don't think there would be enough folks willing to carve their own nocks to make it worth that separate setup...
hmmm...
Jim
-
Well then I guess I have to buy the full sized Reparrows and cut 'em off to make the "Re-nock-o's"...or be a lazy sod and leave 'em full length.
-
Scattershot,has ya covered.Ya beat me to it Gene.
-
LOL, great minds, and all that....
-
LOL, great minds, and all that....
...and all fools fail in familiar fashion!
>:D