Primitive Archer
Main Discussion Area => Flintknapping => Topic started by: iowabow on March 28, 2011, 07:36:42 pm
-
I think you call it abo when you don't use copper. Anyway this was made from a piece of flint a friend gave me. He found this when he was arrowhead hunting and thought it was heat treated. Most likely it was in a forest fire. Only half of the stone was heat treated so this was a strange point to make. I only used deer antler on this one. You abo people are crazy and I may one day join you. I did find a deer leg bone I would like one of you to identify... any volunteers
(http://i1205.photobucket.com/albums/bb423/Iowabow1/2011-03-28152109.jpg)
(http://i1205.photobucket.com/albums/bb423/Iowabow1/2011-03-28152133.jpg)
-
Thats very good for abo knapping.
Abo is fun :)
-
Pretty good first abo.
-
great job!
-
very nice work
i prefer doing it abo 8)
-
Someone told me I needed to use a leg bone maybe ulna it think. Can anyone tell me which one it should be.
-
ulna from what i hear
all i use is a moose billet and white tail tines
would like to get and ulna and give it a try
-
A deer died in the valley last year and so I went and looked for the ulna is this it ?
(http://i1205.photobucket.com/albums/bb423/Iowabow1/2011-03-28171551.jpg)
-
great job. stick with antler for percussion and pressure flaking and use bone for final edge work. i use the ulna a lot. its good for cleaning up the deltas and sharpening. also is good for notching easier rock. the tough stuff will chew it up if you notch with it. that bone isnt the ulna. i'll post a pic of one later. the leg bone that comes off the deers scapula is two parts attatched by tendon. if you arent looking for it youd never know it was two bones.
-
Looks Burlington'ish. Good point. I haven't done much abo so can't help ya in that department..
-
Thanks for the input. Can you thin a piece equally with antler. Another words can you work the stone with the same skill?
-
Looks good. Looks like some tough rock too.
-
only thing different working with antler is platform prep. dont grind the edges too hard. copper can push through it, antler wont. i do very little grinding anymore. i just set up the edge with the tine and nock off the sharp edge then push.
-
yup,like jamie
when i use abo tools,very little abraiding seems needed
-
Nice point! It is a lower front leg bone. Here in Yosemite we use them to make gambling bones, needles, bone awls for the basket makers and leather punchers.
-
Nice point,pretty material and yep'lower front leg,make good knife handles. ' Frank
-
That bone looks weathered and dry. It may be to soft or deteriorated to use on stone. I would think that a fresh bone would be best and strongest. Maybe other ABO'ers can advise better.
-
Sweet job on the abo point. Pretty rock also.