Primitive Archer
Information and Resources => Trading Post => Topic started by: deepsix406 on August 11, 2011, 04:38:40 am
-
Im from montana, with a relatively limited bow wood selection, built dozens of mtn maple, and board bows, now im interested in staves/billets i cant get my hands on locally. Ive got lots of materials to trade; flemish loop strings of all sizes,
two un-planed bamboo backing strips, couple ipe belly lams,
(http://i1198.photobucket.com/albums/aa447/deepsix406/trademat10.jpg)
bakers dozen raw-square tamarack arrow shafts, a router-mount shaft turning tool that makes the square shafts round.
(http://i1198.photobucket.com/albums/aa447/deepsix406/trademat8.jpg)
(http://i1198.photobucket.com/albums/aa447/deepsix406/trademat5.jpg)
i also consider myself a talented fly tier, i tie mostly dry fly's and massive amounts of marabou jigs(killer on spring rainbows and walleye)
(http://i1198.photobucket.com/albums/aa447/deepsix406/marabous.jpg)
and a bleched duck skull i just finished up
(http://i1198.photobucket.com/albums/aa447/deepsix406/trademat11.jpg)
-
whats the dimensions on the bamboo backing strips
thanks
noel
-
one is just under 2" wide 6' long , the other is 1.5" wide 6' long, ipe is close to the same and 6' long
-
router jig and blank shafts have been successfully traded,
the rest of the materials are still available.
-
Did you make the router jig? If so do you have plans on how to make it? Thanks.
~Barry
-
sorry, its a one off design, no plans.