Primitive Archer
Main Discussion Area => Bows => Topic started by: soy on August 25, 2011, 06:23:11 am
-
Hello all, I have here an iron wood 59" ntn 31#@25" .did the arrows up first trying to match the bow to them for my brothers girlfriend .had a few trouble spots in the wood, was kind of a challenge. It looked good on the tree but my camera adds bad tiller...some add 10#mine adds bad tiller...but it shoots good. I hope to get better as I get a few more under my belt. :'( as always comments welcome. Also after the belly toasting thread I tryd it out and re tillerd 24 he's after heat no problems thanks guys ;)
-
nice bow and the full draw looks good, how high have ya got it braced, look's kinda high, probably just me, still that's a bow to be proud of, Bub
-
Looks good to me. Nice job. :)
Pappy
-
Excellent work! When looking at the high brace height I was wondering too. Jawge
-
Me too...
Del
-
The brace is 6.25"just brushes the fist and thumb.
It could be brought down but is giving a good clean release, thanks for the observation will a deeper brace do harm to the bow? The string still has to get shot in so it may correct its self ;)
-
Soy, looks real good on that full draw.....probably shoot forever
rich
-
Nice job on that one, looks good to me as well.
-
Try to always use the lowest brace height that gives you clean flight. Any higher and it's just stressing the bow more than necessary.
Nice bow.
-
Looks fine to me. But then again, almost everybody's tillering looks better than mine! :-[
-
Thanks agan everyone. Gun Doc I feel the same of my tiller skills but at least our units can fling arrows and I guess that counts for something ;)
-
Nice Bow Soy. Looks good!