Primitive Archer
Main Discussion Area => Bows => Topic started by: wytetale on September 17, 2011, 06:34:03 pm
-
This is a new design Takedown that we made using the same BBO bows that we make, The first one we made about a month ago was with the metal sleeveand it worked good if you like a straight grip, We were able to use the same profile on our handles using this design with the Fiberglass wrap. It really makes for a sweet bow. The riser is Chechan with the core being Jatoba and the belly Osage. The limbs are backed with Bamboo and covered with Diamondback skins.
(http://i127.photobucket.com/albums/p133/wytetale/P1000824-1.jpg)
(http://i127.photobucket.com/albums/p133/wytetale/P1000825-1-1.jpg)
(http://i127.photobucket.com/albums/p133/wytetale/P1000826-1.jpg)
(http://i127.photobucket.com/albums/p133/wytetale/P1000833-1.jpg)
(http://i127.photobucket.com/albums/p133/wytetale/P1000834.jpg)
(http://i127.photobucket.com/albums/p133/wytetale/P1000838-1.jpg)
-
The bow is 63"ntn and pulls 48lbs at 28"
-
What is the core wood? Teh bellies are a thin lam of osage?
-
Nice one!
-
Woe..that is one exquisite bow. Perfectly executed and flawless. 8)
-
Great looking bow..... I like the takedown system.... keep it lookin like a one pc... Good work!!
-
We use Jatoba for all our core wood and Osage for the belly, its a combination that is hard to beat. The bow is 63"ntn and 48# at 28"
-
Thaty's a beauty,very nice work. :)
Pappy