Primitive Archer
Main Discussion Area => Around the Campfire => Topic started by: Auggie on November 01, 2011, 09:35:23 pm
-
I picked up a cva bobcat 50 cal today,was wonder if anyone had info on where to get a wood stock for it?
-
Go to www.muzzleloadermag.com look at their advertising. Lots of stock makers out there. Also go to the CAMPFIRE on the same site and look at the forums.
-
Also Dixie Gunworks sells CVA parts.
-
I have two of them. One shoots 220 grain with sabots like a dream, the other shoots round balls great.
-
I would leave it like it is unless you have the skill to restock it yourself from a blank you cut.
Wood M/L stocks don't come as a drop-in item, lots of tedious fitting and shaping even on a precarve, if you could find one for Bobcat. Bottom line, you would have a couple hundred at least in restocking a $90 gun.
If a wood stock is not available, you would have to take the composite stock off your gun, send it with a wood blank to a person with a duplicator who would use your stock as a pattern to duplicate it in wood. It would then be a precarve, similar, but not an exact fit for the barrel and lock which would have to be hand fit by you or a competent gunsmith (more bucks).
Here is a discussion on doing exactly what you have in mind, nice looking upgrades but done by guys who know how to build rifles from scratch.
http://www.tradrag.com/forum/viewtopic.php?f=4&t=2432
Here is a step by step on how to upgrade a bobcat to a wood stock.
http://www.tradrag.com/forum/viewtopic.php?f=34&t=2377
-
I am always intrigued by a good search for information.
Here is my latest finding.
A CVA Mountaineer is a wood stock version of a Bobcat. I don't know if the stock would interchange but suspect it would with very little fitting.
A place called Deer Creek Products specializes in CVA parts and may have a wood stock to fit your gun. They don't have a website but here is their contact info; Deer Creek Products (6989 E. Michigan Rd., Waldron, IN 46182, or PO Box 246, same ZIP; phone 765-525-6181)