Primitive Archer
Main Discussion Area => Arrows => Topic started by: Kegan on July 30, 2007, 04:10:47 pm
-
Well, for a while now I have been having trouble with a good arrow/fletching combinations, so I kept coming up with only a coupla arrows at a time, if that :-\. So, after getting tired of trying to trying to glue trhee featehrs on I finally tried the Southeaster Indian two fletch. I love it! It works better than all my other attempts, especially with these sourwood shafts, and is my new standby! Plus, I now have some good flying arrows for fall :).
I'd like to thank Mark O for the blade stock for the trade points and Pat B for the feathers and sinew- without I would have been in trouble ;D!
[attachment deleted by admin]
-
Those look nice. You're so much more primitive than I am. I should be ashamed of myself. Ha, ha. I lose arrows so fast it breaks my heart.
J. D.
-
Well, my arrows primitive because my "effective range" isn't over 15 yards ;D
-
Nice looking arrows. There is nothing wrong with not taking long shots. I practice out to 40 yards regularly. I have never shoot an animal over 20 yards. Many times I have been under 5 yards. Its all about shooting where you are comfortable. I personally like the challenge of getting close. Justin
-
beautiful arrows. just an observation: i noticed you used the shiny side on the outside (just like i did) but i was told it should be on the inside. the fact that they fly well shows that you should try everything and find out for yourself what works and what doesn't (even if that means repeating errors of the past ;D )
-
not only nice arrows, but nice quiver, too. is that self-made?? - seems to be similar to the badgerfur quiver i posted.
frank
-
Very nice set up,looks like you are ready now. :)
Pappy
-
Good looking arrows and quiver. I like those Eastern Woodland two-fletches, too. Like Marius said, it's easier to get them flat on the shaft if you turn the dull side out, but as long as they're tight to the shaft, they fly well either way. Good job.
-
Thanks everyone. Honestly, I didn't know you were supposed to turn the dull side out- I ws mainly following and old article in PA (Vol.5 issue 1 I belive). They sly superbly, depsite not being completely tight on the shaft (they do bow away from the arrow- which explains why they should be put on the other way). But they fly well so I have no complaints :).
Frank- Yeah, the quiver is selfmade. I really like it too, just finished it a few weeks ago. It is very quiet, sturdy, and sharp, even if it is a little modern ;).
-
aaaaaaaaah modern or not: to see a few details of it would make me happy. i really got into making quivers lately...did you check on my badgerfur quiver?? it's at this link:
http://www.primitivearcher.com/smf/index.php/topic,2311.0.html
it's same stlye then yours...well...less modern 8)
frank
-
Frank- It's just a simple straightforward back quiver- deer rawhide cylander and bottom, soft black leather mouth, an old belt for the strap, and some fur on the iside to quiet the shafts. :)
Here are some picture sof the fletching and point I forgot to get up. The point looks a little small compared to the haft, but it is simply slanted a little, whoops ;D
[attachment deleted by admin]
-
thanks kegan! - i never used rawhide for quivers; isn't that a problem once the rawhide gets wet??
frank
-
very nice set kegan. nice to have another caveman in the clan. frank it actually takes quite a bit of moisture to get rawhide to go limp. peace
-
And I left the hair on the outsides, it the water isn't coming stright into the mouth, it's fine.
Jamie- Thanks! I like the simplicity of the old cave-crafts. Beats spending money ;D
-
Nice arrows and quiver. I am going to build a quiver just like that with a piece of deer rawhide that I have. What did you use for the bottom of the tube. I was thinking about cutting two pieces of rawhide gluing them back to back so that I would have fur on inside and out. Do you think that would work?
-
Sounds good to me. I did that on my last quiver and it worked well, but for me most of the noise is at the top- now I just sew another peice of hide on the bottome and double stitch the threading. I have even just stuffed a larger, stiff piece in the bottom to preotect it from getting cut.
-
i use grass , cedar bark, or phragmites heads stuffed into the bottm of quiver to protect heads. peace
-
I use palm fronds broken up er cattails ta keep noise down an protect heads in bottom of quiver......bob
-
I use Spanish Moss.
-
Hey Eddie da "redbugs" come free with the spanish moss ? ;D ;D ;D...........bob
-
They don't bother you unless you wipe your butt with it >:(
-
considering im really fond of northern moss im glad i learned something about southern moss!! :o
-
Raindeer moss works well. It is a bit stiffer than Spanish moss and doesn't have red bugs. ;D But I wouldn't wipe with it! :o Pat