Primitive Archer
Main Discussion Area => Bows => Topic started by: bow101 on January 11, 2012, 08:14:43 pm
-
I'm a newbie here....
I just got some FRee bow slat :)Oak and Maple material today. It's mostly at 1.34 inches wide and about .210 thousands thick.
Is this allright for laminating..?
I wanted a full 2....2 1/4 inch but beggars cannot be choosy....lol..:)
-
I have no experience with that, but some one here will...welcome to pa. ;D
-
Welcome to PA!! That should work just fine. Free is the best part. Use the maple as core, oak as backing. I'm no pro, but that would be my suggestion anyway. Be sure to get some pics in progress. I'm sure everybody here would be happy to help along the way. Again welcome!
Tattoo Dave
-
Thanks Guys,
I'll try to post as much as possible....
I'm probably better to post in the HowTo's and Build-a-longs section..? Correct..?
Now that I sort know my way around.
-
If you are building a bow, post it here in "Bows". ;)