Primitive Archer
Main Discussion Area => Bows => Topic started by: sleek on February 19, 2012, 02:01:29 am
-
I made this bow not too long ago and really enjoy the heck out of it. I was Fishing one day and saw this sapling floating down the river. I had to make a bow of it so I used my rod to catch it and reel it in. The bark was all gone and the wood had chew marks all around it. I only knew it was a thick ringed white wood that was soaked in water.
I let it dry a bit, cut it to basic shape, dried it some more ( not telling how long for because I dont wanna get fussed at ;) ) heated up the belly good and hot for 2 hours, then started tillering after it cooled. I wanted this to be a target bow so I was going for 30 lbs at 24 inches. The tiller was very tricky for me because the two limbs are offset at the handle, making one limb further from me that the other, straining them differently. This was a pain in the neck.
After many hours of tillering and heat correcting I got this. It shoots fast despite 3 inches of set ( started with .5 inches of reflex ). I am currious for tiller comments. Speed on the chrono is 140 fps with a 400-425 grain arrow. Any comments on performance are welcome please!
http://s1092.photobucket.com/albums/i411/rocketernally/Beaver%20Bow/
How do I load images rather than just post links?
-
You got my attention with the title. That is a neet story, that tends to make the best bows(a good story behind them) can't help with photos and photobucket I ca.t use them any longer on my phone (they changed somthing )but someone will help ;)
-
Thanks, hopefully I can get some pics up soon other than the link I posted.
-
Hover your cursor over the picture in your photobucket album and click on the 'image code' option. that will copy the code to your clipboard. then all you need to do in your PA post is hit 'ctrl-v' and it will insert everything you need for the picture to show up in your post. Hope that makes sense.
-
(http://i1092.photobucket.com/albums/i411/rocketernally/Beaver%20Bow/IMG_1361.jpg)
(http://i1092.photobucket.com/albums/i411/rocketernally/Beaver%20Bow/IMG_1341.jpg)
(http://i1092.photobucket.com/albums/i411/rocketernally/Beaver%20Bow/IMG_1355.jpg)
(http://i1092.photobucket.com/albums/i411/rocketernally/Beaver%20Bow/IMG_1357.jpg)
-
Hey thanks! That worked.
I would like to add that one limb, the bottom in the top picture and the top in the bottom picture ( was trying to figure out which limb should go up for the best tiller profile ) has a natural kink grown into it near the fade shown best in the image of it laying unbraced against the door in the upper limb in that pic. That is not from a hinge, I would like to make that clear, that it was not a tillering defect, but grew that way.
-
What a cool lookin' bow... Makin' a bow out of a piece of beaver chewed mystery wood that you reeled in with your fishin' pole is just plain awesome in my opinion, good job.
-
how long is it nock to nock,and what does your front profile look like? its hard to judge your set and how well you tillered it due to the mystery factor.? did ya thank mrs beaver ;) :laugh:
-
Nice bow. I was a bit surprised at the title of your thread though. I've been working on an article for PA magazine with the same title. The sapling I used was also a gift from a Beaver.
-
This bow sets you well in the "bowyer" catagory for taking an unknown wood that has survived unknown(except tor beaver tooth marks)circumstances and made a well tillered bow. This is a great learning situation not only for you but to anyone that reads your post and views this bow. Well done! 8)
I prefer the last full draw pic id I get a vote. ;)
-
Love the beaver bow !...Step up from my beaver chewed arrow shafts I make. Now that would be a pair-up,beaver bow,beaver arrow. Great story and bow ! ! ' Frank
-
Very cool!
-
I think that is a awesome story and a very nice bow......I agree with Pat you would get my vote for not knowing what the wood was and the situation behind it with the beavers. You made a very good looking bow.
-
Well gosh, thanks guys. I was worried about the back breaking on me with it being so highly ceowned and marked up. But the thick ( only 4 rings on this tree ) growth rings gave me comfort in the underlying fibers taking the stresses. I wish I knew the wood type.
Marc, I look foward with great interest to your article. When do you think it will publish?
I would like to add that this tiller was not an easy one to chase ( for me anyways ) I will have front profile images up today when my wife comes home from work. The camera has to many buttons for me to know how it works :) I love the primitive mind set.
-
50 inches ntn and I thank mrs beaver very much :) I will keep a rod ready for catching beaver snacks as they float by when I fish from now on :) what do yall think with that profile?
(http://i1092.photobucket.com/albums/i411/rocketernally/IMG_1453.jpg)
(http://i1092.photobucket.com/albums/i411/rocketernally/IMG_1450.jpg)
(http://i1092.photobucket.com/albums/i411/rocketernally/IMG_1447.jpg)
(http://i1092.photobucket.com/albums/i411/rocketernally/IMG_1445.jpg)
-
must be a decent wood to hold up to all those chew marks on the back...neat
-
That is cool. I have seen a couple of beaver sticks that got me thinking beaver bow, but I never found a real good candidate. That is pretty awesome you snagged it then turned it into a bow right quick.
I was going to say it looks like ash, but I don't know where you got it. Might be lots of other potential woods in your area.
-
great bow and story.now it needs a beaver tail handle wrap.good job buddy
-
It came off a river bank just outside of Tulsa Oklahoma. It is a real tension strong wood, but kinda compression week, responds real well to heat treating. I wish I knew what the wood its, but Mr. Beaver made identifying it impossiable. A beaver tail wrap.... Hmmmm, with a beaver tooth inlaid as an arrow pass.....
-
now were talking.get that handle wrap and start looking for a tooth.