Primitive Archer
Main Discussion Area => Flintknapping => Topic started by: mcginnis6010 on February 28, 2012, 07:07:49 pm
-
I've just gotten into flintknapping and I was wondering what type of rocks or minerals I should try to look for. I live in NW Virginia.
-
What I did was watch a buch of youtube videos, and pay attention to how the material breaks, and what it looks like when it does. Then just basically go out with a hammer or find a hammerstone and start beating on rocks until you find some that break like flint. And most importantly, have FUN!
-
I would go to 3 rivers archery and purchase naviculite or dacite to begin with. Thats what was recommended to me. I have tried obsidian and a few others and so far the naviculite and dacite seem to be the most forgiving of my inexperience.
-
Well I actually have some obsidian and dacite from a recent trade. I was looking for info or advice on what I should look for when I go on my trips through the woods and streams.
-
Just take a spalling hammer or stone & start wackin. It breaks with a slick or semi-slick surface give it a try. Save a few pieces of various stones & heat to find if its knappablility changes. Maybe someone familiar with your area will chime in. Lots of luck,& show us what you find. Tower.
-
Thanks tower. Ill post pics of stuff I find. I know I find a lot of quartz around here but Im not sure if its knappable. Found a big piece of quartz today that had a pocket of crystals. So for some reason it makes me think that quartz isn't a knappable material.
-
Its knappable but I've heard itd difficult. Quartz that is , Quartzite I think can be heat treated & can be knapped. But I have no first hand knowledge of it.
-
Well I could give the quartz a try. I certainly don't have a shortage of it. The supply of quartz I have seems to be infinite.
-
I have seen points made of Topaz found in the granite up-lift reigon of the Texas hill country. Stunning points!
-
You can knap quartz...it just tougher than a Saturday night in jail :D I'll bet if you look hard enough you can find some better material than that ;) I either take a big solid copper rod or find a good hard/heavy round hammerstone with me when I'm walkin the creeks. Give it a try! Anything that breaks with a conical fracture and is decently smooth is worth haulin back and breakin up to learn on. LOTS cheaper than buying rock to learn on. I was told it takes 2000lbs of rock to get good at knappin. I've broke at least that in the last year ::) good luck! Post em up when you find something :)
~Will
-
Quartzite is knappable.
-
Thanks everyone. That's what I love about this site lotsa good folks with lotsa good advice. ;D
-
Yeah, quartzite is tougher than woodpecker lips!! Its got so many fractures in it. I have seen some artifacts that were made from it and they didnt look too bad. If your ever down in NC, swing by the Uhwarie NF and hunt out some rhyolite. Its tough too but not as bad as quartzite.
-
Your looking for rocks that kinda shine in the light.... almost like glass. another good tell is if you see rust on a rock..... then bust her open.....
-
I've actually heard that ryolite it a tough rock. Unfortunately I don't think that I be going to NC anytime soon with three kids and gas prices going sky high. Maybe in another 17 yrs when the youngest is out on his own. Lol
-
Saturday night in jail lol woodpeckers lips lol. Anyway when I started looking for flint in my area a guy suggested that I go to the state geological survey. This document will describe the formation and its structure. The document or web site should site the location of where the samples were taken from. Armed with this information you should find more rocks than fleas on a junk yard dog. Lol
-
Ill look into that iowabow thanks