Primitive Archer
Main Discussion Area => Bows => Topic started by: Easternarcher on August 14, 2007, 03:21:36 pm
-
Just had a call from the local parks dept. who are generously offering me some white elm logs removed from the parks...
Question was asked if I wanted limbs as they generally have tighter rings which in theory should make stronger wood? ???
I told him I didn't know for sure and would check it out.....so, which do I want for selfbows or backed? Tight groth rings or less dense rings, which may have a thickness of 1/2" between them
-
Personally I would take either as long as the gettin is good ;D Free wood is always good.
-
It depends on weather you plan on chasing them or not,I personally prefer the tighter growth rings,I think the wood is denser but some will argue the thicker rings make for a stronger back.
I don't know for sure,but have not had any trouble with the thin ones. :)Like Dana said if it is free it is all good. ;)
Pappy
-
Great....I think I'll take what I can get and be grateful it's free...maybe even build the gentleman I've been talking to, a bow in appreciatiuon..gotta keep in the good graces....
-
I like the word free. Just keep in mind there is a compression and tension side to limbs and orient the back with the tension side as the back. Got it or is more explanation needed? :) jawge
-
I recently tried to tiller a tight-ringed elm bow and got a lot of set. There were about 20 rings per inch. I've heard others say that wide rings are better in these broad leaved trees.
-
I like the word free. Just keep in mind there is a compression and tension side to limbs and orient the back with the tension side as the back. Got it or is more explanation needed? :) jawge
George...yeah, I think I got it...the bark side becomes the back....
-
Archer I think what George is saying is the top of the limb is tension side thus becomes the back of bow. The bottom is compression wood and is firewood.
Someone correct me if I'm wrong eh.