Primitive Archer
Main Discussion Area => Bows => Topic started by: Fred Arnold on April 08, 2012, 03:16:09 pm
-
I've read that Red Elm may not be the best wood for making a selfbow but is it strong enough to use without backing? I've got a nice 66" straight, 2 to 21/2" wide with medium growth rings and would like to try carving a bow from it.
-
Red elm is great bow wood. I would not back it unless the back is damaged for some reason. Start carving.
Tell
-
I agree with Tell!
Here is the first red elm bow I ever made. It was made for last years TG bow trade, 60"t/t and pulling about 50#@28" if I remember correctly. The giraffe skin pattern backing on this bow is only tissue paper and does not effect the performance or duribility of this bow.
(http://i5.photobucket.com/albums/y199/PatBNC/TGtradebowelm001-3.jpg)
(http://i5.photobucket.com/albums/y199/PatBNC/TGtradebowelm004-2.jpg)
(http://i5.photobucket.com/albums/y199/PatBNC/TGtradebowelm003g-1.jpg)
-
That's good news!!!
Pat do you remember how wide you left the bow at the fades and how long before you started tapering to the tips. I really like the looks of that bow.
-
Fred, I don't remember the exact dimensions but I'm guessing about 1 5/8" at the fades with a slight taper to 1" or 1 1/4" eight inches from the tips. I left the tips 3/4" until after I bent the curves then brouht them down to 3/8"
You can see the complete "build along" on TradGang, pg 25 of the "Bowyers Bench", 11 posts up from the bottom. "Trade Bow, 60" elm..."
-
Red Elm makes a great selfbow......I have one made by halfeye.
-
Never made a red elm but finished a winged elm a few months ago and it is one of my favorite bows,smooth and quite,I wouldn't think their wouldn't be much difference,not sure on that but have always heard red elm was good bow wood. :) :) It is like some other white wood pretty supseptable to moisture at least mine was while building so be sure to keep it as dry as possible when building and seal good afterwards. :)
Pappy
-
Well you've convinced me enough to start working on it next week. It is dry and at least ready to outline and remove some wood.
Where I live there are an abundance of trees which follow around a creekbed that winds 3 times through my small acreage.
A lot of the trees i don't recognize but there is an abundance of black walnut, mulberry, and maybe 2 species of elm (not red).
I went out this morning and cut down one that I thought looked fairly straight and sealed the ends. Then split it into quarters, removed the bark and sealed the backs. The bark was a cinch but splitting took everything out of this old boy.
Should have had 3 good ones but ended up with 2 because I tried to get 4. A couple of them aren't very deep on the small end.
Only 1 major knot but sure a lot of pin knots on these staves.
Does anyone have an idea of the type tree from the leaf pic in the last photo?
-
Could be american elm or slippery elm (red elm). Not sure.
-
Apologies for bringing an old topic back to life.. but the question asked about the leaf ID in the last pic... it's hackberry...
-
Hackberry.