Primitive Archer
Main Discussion Area => HowTo's and Build-a-longs => Topic started by: Zemenar on September 01, 2007, 08:14:05 pm
-
Hi,
I remember reading in Primative Archer,on how to make a Badger skin quiver.
Can't find the magazine or article,does anyone know where I can get the instructions?
Thank you
-
I will check on this for you.
-
There's a picture of a nice one on page 26 volume 5,issue 3,made by Norma Pinney
-
Its in the April/May 2007 issue of primitive archer....I was just rereading it last night.
-
Yes is it 15.2 issue which is the 2nd issue of this year page 12 ;D
-
I made this quiver in December 07 after being inspired by Steve Sell's article "How to create a badger skin back quiver" in the April/May issue(volume 15 issue 2 as stated by Calendargirl). I followed the basic instructions and in the end I added my own stuff to set it apart. The tube I made was actually smaller than the large tanned badger and so I opted for a hide that was a little smaller and better fit. I will use the same plans again but make the tube a little larger as Steve mentioned in this very easy to follow article.
Thanks Tracy
[attachment deleted by admin]
-
I posted one that I made just recently:
http://www.primitivearcher.com/smf/index.php/topic,6516.0.html
I got the idea to make the badger quiver from the April/May 2007 issue of PA. Steve Sell had an excellent article on how to make one, so I got the materials and dove in! Hope this helps (sorry a little late :-[)
Joe H