Primitive Archer
Main Discussion Area => Bows => Topic started by: KHalverson on July 28, 2012, 09:43:13 pm
-
I'm pretty new to bow building but figured why stand at a bench when ya can sit and be nice and comfy
so a trip to the local steel supplier for some drops of the proper stock 6x6 square tube and 1/4 flat stock
then a trip to the lumber yard and here's what i came up with
it'll hold any thing from a sizable quarter split to a branch bow
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/005-15.jpg)
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/006-12.jpg)
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/009-7.jpg)
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/011-9.jpg)
(http://i258.photobucket.com/albums/hh264/oxbowsteelheader/012-6.jpg)
questions, comments and critiques welcome
thanks
Kevin
-
Kevin...My only question is...will you please bring it to elm hall next weekend so I can try it out? If I like it I might not get off it for hours tho >:D :)
-
Very slick :)
-
Looks like it works well, does the stave press swivel? I'm trying to come up with something similar that is portable, folds up and has a tillering tree incorporated into it and is still stable. Also is the stave horse gentle on the bows back and if you ordered it via mail was delivery on time and quick? I need to put something together within two weeks and still am not sure of a design. Thanks
Greg
-
Blackhawk, you can sit on my bench if you help me with the osage I've got. Bugholes all over, and deep too. The leather in these presses seems to work good but it might take a more experienced eye to look for damage to the back. Plenty of room to angle the staves to so you can work from different angles on them. Kevin made these, didn't come in the mail ;D
-
Nice, looks well built. Think you should have saved yourself some work, and bought Keenans setup. ;)
-
awesome, I like it. I have a stave press and was wondering if that might work after seeing similar set ups at MOJAM and now yours; I think I know what I am doing.
-
Badly Bent, I have the perfect item for you. Check out our Stave Master Benches on our web site. Keenan & Lulyn
-
You are just missing a comfy cushion off an old sofa... very important bowyers tool the comfy cushion ;D
Del
-
Those stave press's are good for draw knifeing the stave down but no so good where you need to rasp.
I've welded up a few for other people. I don't make mine straight on like yours but mine you set a little to the side so you can put the stave under your arm if need to.
-
I have a stave press that I "won" at the MOJam auction last year. I should probably mount it to a bench!
-
Looks like the one I made. I welded it to a pipe and set it in the ground under a shade tree.
-
I may have to make or buy one of those. I think I saw something like it on the 3Rivers site. I always have a hard time holding a nice big stave on my bench for bark/sapwood removal. No shaving horse I've ever tried fit this situation. Well, I take that back Mike Yancey had a monster horse several years back that looked like it was made for this.
-
I use mine belt instead of leather, more cushion and also more grip to help eliminate side to side wiggle. I like the mounting to a bench idea for sure, might have to try that.
-
Looks like it works well, does the stave press swivel? I'm trying to come up with something similar that is portable, folds up and has a tillering tree incorporated into it and is still stable. Also is the stave horse gentle on the bows back and if you ordered it via mail was delivery on time and quick? I need to put something together within two weeks and still am not sure of a design. Thanks
Greg
I just checked out the Stave Press sold by Three rivers Archery. They have a video about it. Their version swivels, you can clamp it to a table/bench, and the clamping mechanism swivels as well. Its pretty cool, a little pricey but the only thing I've seen that would work for a big quarter split. I've gotten by all these years aithout one though, but not without numerous four letter words every time a stave jumps out of my vice.
-
Nice. You did a good job. I do think however the stave press may be a little to powerful for yew and may leave dings in it. After making bows for a while Im thinking I need one of those stave holders where you put your feet and it holds a stave. Any plans out there on how to make one??
-
I don't know how much pressure the back of various woods can take. This is my second time trying this self bow stuff, the first being about 8 years ago. I tried using vices and stave horses and this home bru stave press holds the stave more securely than any other tool I've used. If that helps me work on more bows because I'm not fighting the stave, I think its a good thing. Plus, with KH building me one, I could actually afford it! And his workmanship is superb. :)
-
Are you related to Jw halverson?
-
havent dug far enough in the roots of the family tree to be sure
-
Do you really want to dig that deep? ??? ::) ;)
-
We have discussed it, but not at great length. Fact is, my branch of the Halverson Family Tree was pruned back in the late 1920's. Apparently my grandfather and grandmother were more than a little wild. To further complicate things my Great-great-great-grandfather and his two brothers; Martin, Asle, and Carl each have a different spelling. 1) Halversen 2) Halvorson 3) Halverson.
Uff da.
-
That thingi is way COOOOOL! Love it, love to work outside, too!