Primitive Archer

Main Discussion Area => Bows => Topic started by: missilemaster on November 02, 2012, 05:03:44 pm

Title: wax over satin finish
Post by: missilemaster on November 02, 2012, 05:03:44 pm

Hey guys. I just got done putting a satin finish on a new bow following Gordons instructions using pumice powder. I want to put a couple of coats of wax over it, but I want to maintain the satin finish. What would you guys recommend as a good wax? The finish I used was 8 good coat of spar urethane. thanks,

                                    -Cody

Title: Re: wax over satin finish
Post by: Pat B on November 02, 2012, 05:13:43 pm

Cody, I think any wax you put over the satin poly will add shine inless you don't wipe it off or buff it out.