Primitive Archer
Main Discussion Area => HowTo's and Build-a-longs => Topic started by: vyadha on November 05, 2012, 05:13:05 pm
-
I found 20 spring clamps in my garage. Would these be alright for glue ups with epoxy and tb3 or will it starve the joint?
-
Well i glued up some handles so we'll see. Ive never used spring clamps so im a bit tentative.
-
I don't use any sort of clamp for glue ups anymore. Bicycle tire inner tubes only. 27" X 1" work the best for me. I just cut out the valve. This provides the most even pressure throughout and are dirt cheap.
-
as long as they are good clamps they will work, i use them to glue on handles and tips but used to use them for everything, use tubes now, Bub