Primitive Archer
Main Discussion Area => Bows => Topic started by: tattoo dave on November 08, 2012, 02:50:06 pm
-
Ok, so I just received a pile of processed sinew from a trade. It has a really strong odor too it. Does this mean it should be cleaned and degreased better? I only ask because all other, sinew I've had, had zero smell, and was clean enough to chew on with no real taste to it. Should it all be that clean before I use it? I plan on making some sinew backed bows, and trying a horn bow also. Thanks for the input!
Tattoo Dave
-
Clean it, to by safe. Hopefully it hasn't started to decompose....
Can you post a picture?
-
Dave soak it until it softens. Then scrape it clean again with a dull knife. Cut away all fat or meat, dont try to save any. Lay it flat and let it dry for a few days. You shoould be good to go.
-
For what its worth I have never degreased any wood prior to sinewing. I have used it on osage and hackberry five or six times. I use hide glue.
-
Thanks guys. I was thinking the same thing, clean it just to be sure.
Dave
-
It should not have an offensive smell to it.If it's rotten I'd think you could pull it apart.Your almost best to just harvest some yourself if that's possible.Smelling a bit like the animal it came from is'nt bad but a rotten smell is no good.
-
I usually wash sinew just before putting it down with Dawn dish soap and warm water. I use this as a presoak for the sinew before I glue it down. I have not worked with sinew that didn't have some grease on it so I like to remove that before I use it.