Primitive Archer
Main Discussion Area => Bows => Topic started by: rileyconcrete on January 30, 2013, 09:22:05 pm
-
I am working on a hupa style bow. I have no yew so I am using juniper. it will be sinew backed. I was wondering if I should temper the belly before i sinew it.
Tell
-
Is it mostly heart or sap Tell?
-
In my experience Juniper has taken well to heat treating, so I would certainly do it.
-
Do y'all always sinew back juniper
-
With any of the junipers species I like to take most of the sapwood off and sinew back them...and its so good in compression heat treating it is really unnneccessary and not needed. Its very elastic wood...just tension weak....but boy oh boy you put sinew on it and look out...it'll make a very low set bow that's highly elastic,and a light in the hand snappy shooter...you can back it with other things,but sinew is the best for juniper ....if I mess with juniper it gets sinew..no questions asked. There's only three woods ill ever sinew again...and that's osage,yew,and juniper. Sinew+juniper=awesomeness
-
anyone tried less elastic backings like linen? (and easier)
-
Thanks Blackhawk
-
Keenan it is a juniper limb so mostly sapwood.
blackhawk, Keenan the bow will be only around 49" ntn. I am looking to get as close to 28" draw as I can. I have seen bows that loefflerchuck has made of juniper and incense cedar that are shorter and have great bend to them.
I have lots of sinew so I plan to use as much as I need to accompish this. Keenan I have your number so I may call you sometime to get a little info on juniper.
Tell
-
If your trying to get 28" out of that you better steam and bend short sharp static recurves on it the last 3-4" of the tips...and no less than 3 courses of sinew....and make it bend full compass thru the handle...and tiller it well.....good luck...it can be done,but it won't be easy street
-
With any of the junipers species I like to take most of the sapwood off and sinew back them...and its so good in compression heat treating it is really unnneccessary and not needed. Its very elastic wood...just tension weak....but boy oh boy you put sinew on it and look out...it'll make a very low set bow that's highly elastic,and a light in the hand snappy shooter...you can back it with other things,but sinew is the best for juniper ....if I mess with juniper it gets sinew..no questions asked. There's only three woods ill ever sinew again...and that's osage,yew,and juniper. Sinew+juniper=awesomeness
If your trying to get 28" out of that you better steam and bend short sharp static recurves on it the last 3-4" of the tips...and no less than 3 courses of sinew....and make it bend full compass thru the handle...and tiller it well.....good luck...it can be done,but it won't be easy street
Tell, I think Blackhawk nailed it! Had some fun shooting my sinew/carp backed Juniper last night at the range. Sinew and juniper = fun Call anytime bro
-
Alright guys, I will be bending static recurves in and had already planned on if bending full compass through the handle.
Thanks blackhawk and Keenan!
Tell