Primitive Archer

Main Discussion Area => Around the Campfire => Topic started by: bushboy on February 11, 2013, 07:58:55 pm

Title: carbon fiber arrows
Post by: bushboy on February 11, 2013, 07:58:55 pm: Hey all,what's the best way to cut c/f arrows to lenth?thx's
Title: Re: carbon fiber arrows
Post by: Buckeye Guy on February 11, 2013, 08:24:58 pm: Chain saw !!! >:D
Title: Re: carbon fiber arrows
Post by: PEARL DRUMS on February 11, 2013, 08:30:56 pm: Guy!

Although I agree with the worthless nut, a hacksaw works better. Dont go racing through or it will splinter out the bottom wall. Go easy and light, keep it square to the end of the shaft.
Title: Re: carbon fiber arrows
Post by: Ifrit617 on February 11, 2013, 08:35:07 pm: Tile saw works the best if you have one.

Jon
Title: Re: carbon fiber arrows
Post by: Buckeye Guy on February 11, 2013, 08:56:05 pm: Sorry !
Not a carbon person !
But dremel makes a good little saw you might try !
Title: Re: carbon fiber arrows
Post by: osage outlaw on February 11, 2013, 09:13:06 pm: Dremel with the cut off wheel works. Wear safety glasses ;)
Title: Re: carbon fiber arrows
Post by: Stoker on February 12, 2013, 06:25:35 pm: Quote from: osage outlaw on February 11, 2013, 09:13:06 pm
Dremel with the cut off wheel works. Wear safety glasses ;)
The only way I cut them. Make the best sticks for a kite indestructable.
Thanks Leroy
Title: Re: carbon fiber arrows
Post by: Rick Wallace on February 12, 2013, 11:49:50 pm: Get you a wood dowel and put it in the shaft before you cut,,less splinters and it will make it a little more stable. I agree with the dremmel.