Primitive Archer
Main Discussion Area => Arrows => Topic started by: Tiredtim on February 13, 2013, 07:51:20 pm
-
Hello All, I think I'm ready to try to make some arrows from purchased shafts. Can any one tell me the minimum tools needed? I know I need a fletching jig. Any suggestions of what and where to purchase? Thanks again guys.
-
Don't need a fletching jig
-
Sand paper to smooth the shafts optional
wood stain optional
fletchings
super glue to attach fletchings
epoxy glue to attach the head
Thread to bind the fletchings optional
file for the nock
-
So Loki, you don't use store bought nocks or use a fletching jig? Just glue and thread to attach the feathers?
-
I do use a Jig for fletchings, but I cut my own nocks.
(http://i268.photobucket.com/albums/jj7/AnLoki/arras018.jpg)
-
Check out this thread for simple, easy and definitely traditional fletching jig. I use it for all my arrows and it works great.
http://www.primitivearcher.com/smf/index.php/topic,24583.0.html
-
That is awesome, Slack! Thanks.
-
I've bought feathers from michaels and made some pretty amazing arrows with my fletching jig, glue, and some self nocks. They came out pretty good. I'll post some pics up soon.
-
Here are 2 primitive styles af fletching that you don't need a fletching jig for, they are just tied on. One is a Cherokee 2 fletch made with tail feathers and the other is a tangential style 3 fletch, with 3 smaller feathers tied to the shaft. In both cases the feathers are inside out with the under side of the feather facing out. I find the feathers lay against the bow better this way. These arrows are cane or sourwood shoots with selfnocks but that will work with store bought shafting too.
(http://i5.photobucket.com/albums/y199/PatBNC/Cherokee-EasternWoodland2fletch007.jpg)
(http://i5.photobucket.com/albums/y199/PatBNC/Cherokee-EasternWoodland2fletch003.jpg)
(http://i5.photobucket.com/albums/y199/PatBNC/Cherokee-EasternWoodland2fletch004.jpg)