Primitive Archer

Main Discussion Area => Bows => Topic started by: snedeker on October 25, 2007, 12:17:58 pm

Title: Titebond 3 temp
Post by: snedeker on October 25, 2007, 12:17:58 pm

Its supposed to be in the low 60s out here Sat. and I was thinking of doing a glue up at my outside workshop.  Usually, I only use TB if its high 60s or warmer, although I see the directions say down to 47 is ok.  To me, it seems like it starts to act a little funny if its cooler.  Think low 60s is safe?

Dave

Title: Re: Titebond 3 temp
Post by: Pappy on October 25, 2007, 12:28:07 pm

Never done a whole glue up but have done a lot of Tip over lays, skins and rawhide such with no problem,I love TB3.Use it on about everything. :)
   Pappy

Title: Re: Titebond 3 temp
Post by: Pat B on October 25, 2007, 01:03:14 pm

Dave, I have dine glue-ups in my basement in the 40s and low 50s with no problems. The glue seems a bit thick at those temps so be sure you get good coverage.    Pat

Title: Re: Titebond 3 temp
Post by: snedeker on October 25, 2007, 02:32:09 pm

Thanks.  I'll prbably give it a go.