Primitive Archer

Main Discussion Area => Bows => Topic started by: Ozzy on March 02, 2013, 02:58:07 pm

Title: Tiller check
Post by: Ozzy on March 02, 2013, 02:58:07 pm

its a maple backed walnut 69 ttt 5" brace with a 16 in stick in it
thanks

Title: Re: Tiller check
Post by: bow101 on March 02, 2013, 03:38:34 pm

So far so good. If you have a long string get'er tillered more and put a short string on it and get 'er so it's safely pulling to around 24" without over pulling beyond your draw weight and without any hinging. I imagine you are wanting 50#...? ::)

Title: Re: Tiller check
Post by: bushboy on March 02, 2013, 03:41:22 pm

I would get the outter limbs bending more before the inner limb begin to take set,but that just the way I tiller.

Title: Re: Tiller check
Post by: Del the cat on March 02, 2013, 05:50:10 pm

I'd say the inner limbs are work ing fine, leave 'em be and start to get the mid/outer moving.
Del