Primitive Archer

Main Discussion Area => Arrows => Topic started by: ozy clint on March 07, 2013, 05:11:25 am

Title: bamboo arrows- which end is best to trim to stiffen spine?
Post by: ozy clint on March 07, 2013, 05:11:25 am

which end is best to trim in order to stiffen them?

Title: Re: bamboo arrows- which end is best to trim to stiffen spine?
Post by: stringstretcher on March 07, 2013, 08:07:37 am

I don't think it really matters which end you cut from, you will get a stiffer arrow.  But what I have found that works best for me, and have seen it on some of the better made bamboo arrows, is to keep the nock diameter of the cane the same as close as possible to one another.  I had some that I had to use small glue on nocks on (tonkin), then some that had a small self nock cut in, and some larger ones with self nocks.  And you will not, I repeat you will not, get them all to fly and group the same, trust me on this one.....

Title: Re: bamboo arrows- which end is best to trim to stiffen spine?
Post by: gutpile on March 08, 2013, 11:31:57 am

that didn't come out right ..either way when you cut it it will increase spine but if you cut you smaller nock end it should be more effective..lol..

Title: Re: bamboo arrows- which end is best to trim to stiffen spine?
Post by: PEARL DRUMS on March 08, 2013, 12:42:11 pm

I always cut off the point end and leave my nock end alone. Mostly becasue I cut knocks in before I do anything else. So they are set.