Primitive Archer

Main Discussion Area => Bows => Topic started by: bowhntineverythingnh03743 on March 13, 2013, 08:12:03 am

Title: Bow Layout Help
Post by: bowhntineverythingnh03743 on March 13, 2013, 08:12:03 am

Ok I am back again for another round at a selfbow. I have two nice staves that I was thinking for this next go around. One is a hickory stave with a slight bend to it but can be heated straight. Another is a straight elm stave. I would like to make a recruve with one and a flat bow with the other. Since I have been unsuccessful at a selfbow I don't know if I should just jump right in on a recruve. I am looking for some advice on a layout with either design. I would like to make one that is between 62-64 t-t-t and around 50#.

Any advice would be helpful. Thanks guys.

Justin

Title: Re: Bow Layout Help
Post by: burchett.donald on March 13, 2013, 09:37:01 am

Justin, I would go with the flatbow choice from hickory. That is a tough wood and will take allot of abuse while you are trying to learn to tiller.

Title: Re: Bow Layout Help
Post by: George Tsoukalas on March 13, 2013, 10:26:34 am

I've used lots of wood and have never used a wood tougher than hickory. I agree, Don. Jawge
http://georgeandjoni.home.comcast.net

Title: Re: Bow Layout Help
Post by: johnfolchetti on March 13, 2013, 10:27:39 am

Justin,
Hickory flatbow below....50@ 25", reflexed 2" w/ dry heat, tillered out dead flat.....kept it in the hot box overnight every night between tillering sessions till finished it out. Been a couple years, but I think it's 66" TTT, maybe 1 1/2 wide, maybe 1 3/4....will check my notes tonight & let you know.
John

Title: Re: Bow Layout Help
Post by: bowhntineverythingnh03743 on March 13, 2013, 09:56:30 pm

Thanks guys... Hickory flatbow it is then

Title: Re: Bow Layout Help
Post by: Roy on March 13, 2013, 10:12:49 pm

Cool Justin, it will match the top of your head:)...