Primitive Archer
Main Discussion Area => Bows => Topic started by: Ryan_Gill_HuntPrimitive on March 23, 2013, 09:52:41 pm
-
I want to make a short Pacific Yew bow. I have a stave that will work perfectly for it. I would like it to be short to accommodate my 22" short draw. What is a safe length for an un-backed yew bow? Mostly rigid handle. Also I would prefer not to make a west coast type paddle bow. I would much prefer it to be like my normal bows...so if it needs to be a bit "longer" then I am ok with that. 52" inches long and 1 3/4- 2"wide for a 22" draw safe on yew??? I honestly know about "0"<-- this much about yew. It will likely be my one and only yew bow for a while..so I don't want to mess up by making poor dimensions.
-
make it at least 44 inches. Just go with the 50, or maybe a 48 incher.... Sinew back it, you can probably make it like 36-40.
-
Gill, 52" and 1 3/4 at fades is plenty safe for a 22" draw. What does the stave look like in terms of sapwood thickness and ring count?
-
My Osage short bow is 49 inchs tip to tip and it has a stiff handle and can be drawn to 22 inchs so I would assume yew wood could bear the same
-
2 inch wide limbs at the widest at 52 inchs long with a stiff handle you should easily get 22 inchs
-
good to know guys, thanks. I will likely overbuild it a little to be extra safe. The difference between 52 and 54" to me is well worth peace of mind. plus if it comes in under weight, I can always pike it >:D
-
twistedlimbs..! here is a prior post of mine, just click on the image link below the photos, it should open up in IE and you can expand the size. He built the yew bow, 48" 70# @ 24" draw.
http://www.primitivearcher.com/smf/index.php/topic,37097.0.html