Primitive Archer
Main Discussion Area => Bows => Topic started by: rossfactor on April 14, 2013, 01:18:16 pm
-
So, do y'all tend to correct tip alignment if the sting is tracking center across the handle? Or do you just let it be at that point? I've done both, and can't say I've noticed a difference in set or longevity. But I do wonder about increased limb stress.
Just to clarify, I'm talking about a situation where one limb has some lateral bend to the right, the other has some lateral bend to the left, and the string tracks dead center in the handle. Not talking about propeller twist.
Gabe
-
If the string tracks across the handle at brace you are good to go but you must brace it first to determine this.
-
yup, if the string tracks center at the handle, it doesnt matter how wacky the limbs are, you're good to go.
-
If the string tracks on the handle I don't worry about it. There have been several times that I've had one crooked character ridden limb and one straight and clean limb and I have bent the straight limb to get alignment right. I only do that if the character limb is at risk of breaking while making the heat adjustment of course. Josh
-
I dont worry about it as long as the string is tracking close to center. I would think too much lateral bend couldnt be too healthy for the limbs though. I dont have any way to prove that though as Ive built some bows with quite a bit of sideways wonkiness and have never had a problem with them.
-
Post pics of your braced bow so we can see the limbs and how the string tracks.
-
I leave knocks wide and handle unshaped until at least the first brace. Lets me track the string. Jawge
-
Thanks guys,
I agree that string tracking is key. I think that when the tips are way off though, it might promote twist in the bow over time even if the string tracks center.
This case isn't too severe. I'll post pics when I have time, hopefully this evening.
Gabe