Primitive Archer

Main Discussion Area => Bows => Topic started by: jasper on November 21, 2007, 11:52:24 am

Title: backing board bows
Post by: jasper on November 21, 2007, 11:52:24 am

I am going to try a red oak board bow next and was wondering about backing it with hickory like in another thread.  My ? is what kind of glue can be used to back it with hick lams.  I do not have smooth on epxy but have titebond 11.  Will this work as I have glued on handles before with it. Thanks

Title: Re: backing board bows
Post by: DanaM on November 21, 2007, 12:14:07 pm

Yes it will work, make sure you have smooth tight fitting surfaces, clean with acetone first.